Disposable Sensor Inlays for Real-Time Physical Breach Detection
Temporary flexible sensing inlays positioned behind drilling jigs to detect unexpected physical penetration during drilling.
Physical Detection. Digital Traceability.
Aircraft manufacturing involves billions of drilled fastener holes. A misplaced or unintended penetration can result in significant downstream cost and disruption.
Additional inspection and engineering review.
Repair or component replacement.
Manufacturing operations interrupted while the event is investigated.
Potential loss of high-value aerospace components.
Current methods can identify damage after it occurs.
Infra PPN MRO is designed to detect unexpected penetration as it physically reaches the protected sensing layer.
Airbus is targeting this rate by the end of 2027. Higher production rates increase the importance of repeatable, traceable manufacturing controls.
Expected over the next 20 years. Airbus and Boeing forecasts point to substantial long-term demand for new commercial aircraft.
Add physical breach detection directly to the drilling process. Infra PPN MRO is designed to identify unexpected penetration when it reaches the protected sensing layer — while creating a traceable manufacturing event.
A thin, flexible PPN sensor inlay is positioned behind the drilling jig. Expected drilling positions are incorporated into the sensing layout as predetermined safe zones.
Unexpected penetration of a protected sensing trace creates an electrical interruption and generates an alert. After the manufacturing operation, the temporary inlay is removed.
No permanent sensor installation is intended aboard the aircraft.
Infra PPN MRO detects physical penetration of the sensing layer. It does not measure drill depth.
Protected sensing-trace interruption generates the detection event.
No AI inference or camera dependency.
Expected drilling positions are incorporated into the sensing layout.
Sensor inlay is removed after the manufacturing operation.
Designed for connection to a monitoring hub and control box.
Detected breaches can be associated with the operator, work order, aircraft/part, drilling location and timestamp.
The active manufacturing operation is associated with the authorised operator and job.
The temporary sensing inlay is positioned behind the drilling jig and aligned with the protected manufacturing area.
The monitoring system confirms the connected sensing zone is ready before drilling begins.
Expected drilling through the designated safe zone produces no breach alarm.
Physical interruption of a protected sensing trace generates a breach alert.
The system can associate the event with:
Protected sensing layer breached
Affected sensor zone / associated drilling location
Logged operator
Aircraft / part / work order
Automatic timestamp
Earlier breach detection is designed to enable faster quality and engineering intervention before additional manufacturing operations continue.
PHYSICAL DETECTION + DIGITAL TRACEABILITYInfra PPN MRO is being developed as a temporary manufacturing sensing system.
Placed during the drilling operation.
Detects physical penetration of the protected sensing layer.
Removed following the manufacturing operation.
The PPN sensing inlay is not intended to remain aboard the aircraft.
Applicable customer qualification, quality and regulatory requirements will be established during aerospace validation.
| Approach | During Drilling | Direct Physical Breach Detection | Automatic Event Record |
|---|---|---|---|
| Human Inspection | Visual oversight | No | No |
| Drill Guides / Jigs | Guides drill position | No | No |
| Cameras / Vision | Possible | Indirect | Possible |
| Laser / NDT | Application dependent | Primarily inspection | Possible |
| Infra PPN MRO | Real-time monitoring design | Direct trace interruption | Yes |
Proposed differentiator. Drill guides help position the drill. Human inspection helps identify visible errors. Infra PPN MRO adds a physical sensing layer designed to detect unexpected penetration when it reaches the protected zone.
No AI inference. No camera dependency. Physical trace interruption generates the breach event.
Disposable / replaceable sensing products used during manufacturing operations.
Reusable monitoring hardware for each production station.
Event logging, job association, traceability and quality records.
| Product | Indicative Size | Proposed Price |
|---|---|---|
| Nano | 150 × 200 mm | $15 |
| Small | 300 × 400 mm | $32 |
| Medium | 600 × 800 mm | $75 |
| Large | 1000 × 1400 mm | $145 |
| Extra Large | 2000 × 3000 mm | $395 |
Different inlay formats for different tooling and structural coverage requirements. Final dimensions, manufacturing costs, pricing and margins subject to engineering and customer validation.
Illustrative bottom-up model. Inlay consumption, pricing and adoption assumptions require validation through OEM / Tier-1 trials.
Mis-drill and unexpected penetration detection during aircraft manufacturing.
Protected drilling and assembly operations across vehicle and EV manufacturing.
Physical penetration detection during hull, deck and structural fabrication.
Protected drilling and assembly of high-value vehicles, structures and equipment.
Detection of unintended penetration during blade, nacelle and structural manufacturing.
Physical breach detection around high-value drilling, machining and assembly operations.
Working laboratory prototype demonstrating physical trace-interruption breach detection. No AI inference. No camera dependency.
Initial results are prototype observations, not statistically validated performance specifications.
Repeated penetration testing.
Detection repeatability, response and localisation.
Handling, vibration, contamination and temperature testing.
Drill-jig and aerospace structure testing.
Controlled OEM / Tier-1 manufacturing evaluation.
Concept Development • Product Architecture • Commercial Strategy.
Aerospace Manufacturing / MRO Engineering Adviser
Initial laboratory breach-detection prototype demonstrated. Initial destructive breach test successfully detected. Approximately 100 ms response observed. Recorded demonstration available.
Production-grade sensing inlay, control-box engineering, operator/job traceability, repeated bench validation, localisation validation and environmental testing.
Representative aerospace tooling tests.
Target: OEM / Tier-1 evaluations and pilot discussions.
Target: paid pilots and early commercial revenue.
From initial laboratory proof to aerospace manufacturing evaluation.
Engineering, fabrication, electronics and testing
Representative tooling, aerospace validation and pilot development
Business development, customer trials and industry exhibitions
IP, legal, quality and specialist aerospace advisers
Founder and operating runway
Production-representative PPN system ready for controlled aerospace manufacturing evaluation.
We are seeking investors, aerospace manufacturing partners, Tier-1 suppliers, technical advisers and organisations interested in evaluating physical breach detection for precision drilling operations.
Leave your email if you would like us to follow up with updates and validation results. This is optional.